logo Stonemaster

DEDICATED
   MOUNTING

CHEMISTRY PROGRAMME

PRIMER

Reinforces concrete, gypsum and cement surfaces, interior and exterior brick and air brick walls. Reduces and unifies absorption properties of substrates and improves glue adhesion. Use on dry surface, free from dust and dirt. The primer should be evenly applied with a brush, a roller or a paint sprayer. High-absorptive surfaces (i.e. gypsum) should be primed twice by applying the next layer after the first one has dried. Work should be performed at the temperature from 5° to 25°C. Drying time, approx. 3 hours. Consumption – approx. 10-12 m² per 1 liter. Detailed information about using the product can be found on the package label. Available in 1-liter and 5-liter containers.

grunt-stonemaster
krok_2_lamane

DISPERSION ADHESIVE

Adhesive available as a thick paste which is ready to use. Produced on the basis of a synthetic resin with mineral fillers and additions which improve performance properties. It is characterized by high adhesion and flexibility. Used for bonding ceramic, gypsum and concrete tiles to the building surfaces such as: concrete, gypsum, cement and lime plasters, drywalls, chipboards and OSB, as well as cement screeds and anhydrite-based screeds. Work should be performed at the temperature from 5° to 25°C.

Consumption – from 0,8 to 1,5 kg/m².

Detailed information about using the product can be found on the package label. Available in 7 kg buckets.

FROST-PROOF ADHESIVE

Frost-proof and non-flammable, easy to use adhesive, stable on vertical surface, suitable for decorative stones and ceramic floor and wall tiles. It is a mixture of binders, mineral fillers and modifying additives, factory-prepared in a dry form. After mixing with water, it becomes a homogenous adhesive mass for applying in a thin layer. Use on seasoned surfaces, free from dust, grease, lubricants and the residual paints. Put dry mix in a container with clean, cold water (3.6 liters per 15 kg of dry mix) and stir until a homogeneous mass forms. Then, when applying, follow the detailed instruction included on the package label. The work should be performed at the temperature from 5° to 25°C. Use-by time after mixing with water: about 2 hours. Bonding ability: after 48 hours. Consumption – approx.1,4 kg/m² per 1 mm thickness of mortar.

Maximum thickness of the mortar layer: 5 mm.

Available in 15 kg buckets and 25 kg bags.

krok_2_kleje_betonowe_duze
krok_2_kleje_gipsowe_duze

GYPSUM ADHESIVE

Non-flammable, easy to use adhesive, stable on vertical surface, used for bonding and grouting of decorative gypsum tiles. It is characterized by impressive adhesion to gypsum surfaces, cement-lime plasters, bricks and ceramic air brick. For indoor use. Use on seasoned, free from dust, grease and residual paint surfaces. Put dry mix in a container with an appropriate amount of water (6 liters per 12 kg of dry mix) and stir until a homogeneous mass forms. Then, when applying, please follow the detailed instruction included on the labeling of the container. The work should be performed at the temperature from 5° to 25°C. Use-by time after mixing with water: up to 45 minutes. Bonding ability: after 48 hours. Consumption – about 3,5 kg/m².

Available in 15 kg buckets and 25 kg bags.

JOINT

Designed for both decorative, concrete stone and gypsum stone, as well as ceramic and clinker tiles. Frost-resistant, waterproof, non-flammable and easy to use. It is a composition of high-grade meals and cements with addition of resins, which make it highly durable and easy to use. Suitable for use indoor and outdoor usage.

Width of grout: from 6 to 15 mm. Mixing ratio: 0,16-0,18 liter of water / 1 kg of grout. Consumption – depending on the size of tiles, depth and width of the joint, from 1 to 3 kg/m² on average. Use-by time when mixed with water: up to one hour

Detailed information about using the product can be found on the package label.

Available in 5 kg bags.

Available colors:

Chalk Cream Ground Ashen Gray Graphite Dark graphite
krok_3_laczone
krok_4_nieb_razem

GYPSUM STONE IMPREGNANT

Reinforces the surface of gypsum stones and reduces their moisture absorption, thereby helping to maintain it clean. It is recommended for internal decorative stones. After shaking, the content of the container is ready to apply by the brush or paint spray.

Consumption depending on the kind of surface: 8-10 m² of 1 liter. Detailed information concerning the usage of the product is placed on the labeling of the container. Available in 1-liter and 5-liter containers.

CONCRETE STONE IMPREGNAT

Seals surface of porous building materials, such as concrete decorative stone. Forms a protective layer against moisture or weather conditions, retaining the substrate ventilation properties. Revitalizes the natural color of materials. After shaking, contents of the container are ready to be applied with a brush or spraying equipment. Consumption, depending on the kind of surface: 8-10 m² of 1 liter.
Detailed information concerning the usage of the product can be found on the package label.
Available in 1-liter and 5-liters containers.

krok_4_pom_razem

© 2017 Stone Master S.A.

Recommended building chemical products