logo Stonemaster

DEDICATED
   MOUNTING

CHEMISTRY PROGRAMME

PRIMER

Reinforces concrete, gypsum and cement surfaces, interior and exterior brick and air brick walls. Reduces and unifies absorption properties of substrates and improves glue adhesion. Use on dry surface, free from dust and dirt. The primer should be evenly applied with a brush, a roller or a paint sprayer. High-absorptive surfaces (i.e. gypsum) should be primed twice by applying the next layer after the first one has dried. Work should be performed at the temperature from 5° to 25°C. Drying time, approx. 3 hours. Consumption – approx. 10-12 m² per 1 liter. Detailed information about using the product can be found on the package label. Available in 1-liter and 5-liter containers.

grunt-stonemaster

Concrete Glue

Dedicated to the CONCRETE STONE series.

Concrete Glue is a high-quality hybrid , one-component polymer-based adhesive designed to bond all materials and surfaces . Dedicated to bonding Concrete Stone series tiles and recommended for installation of other Stone Master products. .

concrete-glue-klej-hybrydowy

hybrid glue

Instant grip without support

Instantly creates a very durable and flexible joint . Free of isocyanates and solvents is environmentally friendly and safe for allergy sufferers , people who are allergic, especially sensitive to construction chemicals.

krok_2_lamane

DISPERSION ADHESIVE

Adhesive available as a thick paste which is ready to use. Produced on the basis of a synthetic resin with mineral fillers and additions which improve performance properties. It is characterized by high adhesion and flexibility. Used for bonding ceramic, gypsum and concrete tiles to the building surfaces such as: concrete, gypsum, cement and lime plasters, drywalls, chipboards and OSB, as well as cement screeds and anhydrite-based screeds. Work should be performed at the temperature from 5° to 25°C.

Consumption – from 0,8 to 1,5 kg/m².

Detailed information about using the product can be found on the package label. Available in 7 kg buckets.

FROST-PROOF ADHESIVE

Frost-proof and non-flammable, easy to use adhesive, stable on vertical surface, suitable for decorative stones and ceramic floor and wall tiles. It is a mixture of binders, mineral fillers and modifying additives, factory-prepared in a dry form. After mixing with water, it becomes a homogenous adhesive mass for applying in a thin layer. Use on seasoned surfaces, free from dust, grease, lubricants and the residual paints. Put dry mix in a container with clean, cold water (3.6 liters per 15 kg of dry mix) and stir until a homogeneous mass forms. Then, when applying, follow the detailed instruction included on the package label. The work should be performed at the temperature from 5° to 25°C. Use-by time after mixing with water: about 2 hours. Bonding ability: after 48 hours. Consumption – approx.1,4 kg/m² per 1 mm thickness of mortar.

Maximum thickness of the mortar layer: 5 mm.

Available in 15 kg buckets.

krok_2_kleje_gipsowe_wiaderko

GYPSUM ADHESIVE

Non-flammable, easy to use adhesive, stable on vertical surface, used for bonding and grouting of decorative gypsum tiles. It is characterized by impressive adhesion to gypsum surfaces, cement-lime plasters, bricks and ceramic air brick. For indoor use. Use on seasoned, free from dust, grease and residual paint surfaces. Put dry mix in a container with an appropriate amount of water (6 liters per 12 kg of dry mix) and stir until a homogeneous mass forms. Then, when applying, please follow the detailed instruction included on the labeling of the container. The work should be performed at the temperature from 5° to 25°C. Use-by time after mixing with water: up to 45 minutes. Bonding ability: after 48 hours. Consumption – about 3,5 kg/m².

Available in 15 kg buckets and 25 kg bags.

JOINT

Designed for both decorative, concrete stone and gypsum stone, as well as ceramic and clinker tiles. Frost-resistant, waterproof, non-flammable and easy to use. It is a composition of high-grade meals and cements with addition of resins, which make it highly durable and easy to use. Suitable for use indoor and outdoor usage.

Width of grout: from 6 to 15 mm. Mixing ratio: 0,16-0,18 liter of water / 1 kg of grout. Consumption – depending on the size of tiles, depth and width of the joint, from 1 to 3 kg/m² on average. Use-by time when mixed with water: up to one hour

Detailed information about using the product can be found on the package label.

Available in 5 kg bags.

Available colors:

Chalk Cream Ground Ashen Gray Graphite Dark graphite

NEW

impregnat-do-kamienia-dekoracyjnego

impregnation for concrete and gypsum products

Features

Impregnation for concrete and gypsum products by Stone Master is a high-quality agent for impregnation of the surface of decorative stone made of concrete and gypsum.
It is intended for use in interiors and outside buildings.
Due to the content of hydrophobic agents, it effectively reduces the absorption of moisture , protecting the substrate against water penetration into the protected coating.
Water-soluble , does not contain harmful volatile compounds, quick-drying.

Usage and Usage

The Stone Master impregnation for concrete and gypsum products is intended for the impregnation of decorative stone made of concrete and gypsum as well as other moisture-absorbing building materials.
Easy to use, in the 750 ml version with a  efficient atomizer ready for immediate application.
Before application, the product is white in color, and when applied to the surface, it is completely colorless .
Before impregnation, the surface should be dry and dust-free, free of traces of dirt.
Window, furniture and other surfaces that are not protected against dirt.
Intended for use at temperatures from +5 to + 25 ° C. The product should be protected against freezing.

Advantages

Impregnation for concrete and gypsum products extends the durability of the impregnated surfaces.
Provides them with additional protection and thanks to its good performance it is a very economical solution.
With a single impregnation, the 750 ml package allows you to cover the surface even up to 5 m2 .

Specifications

  • High performance:
  • opp. 750 ml up to  5 m2 , pack. 2 Liters up to  10 m2
  • hydrophobic, perfectly protects against the ingress of moisture
  • water-soluble and quick drying
  • allows free diffusion of water vapor
  • available packages: 750 ml with an atomizer and 2 liter in a can.

CONCRETE STONE IMPREGNAT

Seals surface of porous building materials, such as concrete decorative stone. Forms a protective layer against moisture or weather conditions, retaining the substrate ventilation properties. Revitalizes the natural color of materials. After shaking, contents of the container are ready to be applied with a brush or spraying equipment. Consumption, depending on the kind of surface: 8-10 m² of 1 liter.
Detailed information concerning the usage of the product can be found on the package label.
Available in 1-liter and 5-liters containers.

krok_4_pom_razem

krok_4_nieb_razem

GYPSUM STONE IMPREGNANT

Reinforces the surface of gypsum stones and reduces their moisture absorption, thereby helping to maintain it clean. It is recommended for internal decorative stones. After shaking, the content of the container is ready to apply by the brush or paint spray.

Consumption depending on the kind of surface: 8-10 m² of 1 liter. Detailed information concerning the usage of the product is placed on the labeling of the container. Available in 1-liter and 5-liter containers.

© 2021 Stone Master S.A.

Recommended building chemical products